When it topic comes to making a list of cordless drill impact drivers, you may find Makita on the top of the list. The DIY enthusiasts, tradesmen all over the globe particularly like Makita for being their friend since the early seventies. Makita cx200rb review
A lot of do-it-yourselfers are looking nowadays for tools that are both heavy-duty and compact. Here, we will dive deep into a product from Makita that how it would be beneficial. What especially it has to make the decision!
In this Makita cx200rb review we will take less but dig deep into its core and collect all the marrow you need! Then it will be easy to pick or throw it.
Features of Makita CX200RB Brushless Cordless Combo Kit
The 18v toolset has only two sets to offer. Sounds less? No need to worry, both are quite good and some fascinating things to give.
This is a subcompact brushless cordless tool that has two important components that everyone should possess who like to solve their own problems concerning drilling, fastening, etc.
The CX200RB combo kit has the XFD11ZB compact drill driver and the XDT15ZB impact driver in one bag. Here, some features of this set that introduce the product.
XFD11ZB compact drill/driver
The compact driver-drill comes with a brushless motor that can deliver up to maximum torque of 250 in. lbs. Provided with two speeds range, the lower one being 0-500 RPM and the higher one 0-1700 RPM.
You can pick one that meets your demand. The extremely low weight is another distinctive feature. It weighs only 2.8 lbs. You can easily understand you will not sweat using the tool.
XDT15ZB impact driver
The nice thing that makes it different than the others, it is lighter than driver-drill weighing only 2.6 lbs. Most of the time we need to use lighter ones because “the lighter the better”. It has a two-speed brushless motor that is capable of delivering 1240 in-lbs torque.
With a two-speed brushless motor, the impact driver can generate a power punch of 1,240 in. lbs. of torque. It can generate speed up to 3,000 RPM, and up to 3,900 IPM.
Another significant thing about this tool is its assist mode (A-Mode) feature that automatically kicks into high speed if you started with a low setting. The tool can also sense friction increment.
Compactness & Ergonomics
The tool is really the winner in its compactness. The sub-compact driver-drill and the impact driver are with the size and weight of lower voltage tools but with the power and performance, it can easily go to a race with its 18v competitors.
As for ergonomics, we say that the lightweight and compact nature of the Makita 18V LXT has clearly enhanced its ergonomics over other 18-volt tools. Easy to hold handle is another great thing that adds to its ergonomics. Perhaps this piece has one of the best ergonomics of any 18 volts in this category.
Performance
People doing lots of carpentry work, fence building, cabinet installation, and other similar tasks can definitely go for this combo. This drill may not be the best for hard surfaces but can easily drill 1/4-inch holes in materials like plywood, plastics, etc.
The assist mode of the impact driver helps to eliminate “screw cam-out” and “cross threading”. These things reduce efficiency most of the time. It helps to increase efficiency. This is happened by driving at low speed until the beginning of tightening.
The lithium-ion batteries can be busy with your job rather than charging for hours. The brushless motors help to increase the runtime of the 18V LXT batteries along with the life of the tools.
Pros
- Brushless motors
- Overloading, over-discharging is prevented by STP technology.
- Very light in weight. It minimizes fatigue.
- Easy to hold handle.
- Ideal for working in tight spaces.
- L.E.D. lights to make working in darker areas much easier
Cons
- Not suitable for hard surfaces like concrete
- A slight wobble in the impact driver chuck
Frequently Asked Questions (FAQs)
Ques: How to reduce wobble in the drill?
Ans: Using low-quality drill bit may be the primary cause of wobble. Replacing the old bit and try a new good one should solve your problem. Proper installation is also a must. Until you install the bit properly you can never expect to reduce the amount of wobble.
Ques: How wide the chuck open in the drill?
Ans: The chuck normally opens 1/2”. In woods, it can drill up to 1-7/16” holes and in steel, the depth is ½” holes.
Conclusion
Those who are looking for an impact driver and drill driver set Makita cx200rb review will help to make a decision. With some shortcomings, it is going to be enough for your job, especially at home.
If your preference is lighter weight and the compact tool then this tool is perfect for you. The brushless motor also ensures the longevity of the tool. We would like to recommend Makita cx200rb especially for its ergonomic design with compactness.
Related posts…
